ATOMIUM ACTIVE GASOLINE (90ml.)

Up to 50,000 km of mileage

For treating new gasoline and gas-powered car engines with up to 50,000 km of mileage. Two-stage treatment. ATOMIUM ACTIVE GASOLINE has an enhanced formula that promotes the formation of new structures on friction surfaces. The reduced viscosity of the carrier makes it easy to mix in the active ingredient, while the carrier (oil) contains no additives.

ATOMIUM ACTIVE GASOLINE creates conditions in which the surfaces of the engine’s friction components become coated with a specially structured protective metal layer. This layer partially restores the dimensions and geometry of worn parts, optimizes clearances between friction surfaces, and retains more oil on those surfaces.

This provides the following benefits:

Longer service life - the protective layer significantly reduces wear on the most heavily loaded friction components, which determine the engine’s service life.
Protection under heavy loads – the protective layer is much more effective at preventing wear on friction components under heavy loads thanks to its structural properties (microhardness and microelasticity) and its ability to retain more oil.
Easier starting and protection during cold starts – treated surfaces can retain an oil layer during extended periods of inactivity. This makes the first engine revolutions easier and prevents increased wear caused by insufficient lubrication during startup, especially at subzero air temperatures.
Protection during spirited driving – treated surfaces retain a denser oil layer, reducing wear and compensating for insufficient lubrication when engine speed rises rapidly.
Fuel savings – the protective layer and the oil it retains seal clearances in the cylinder-piston assembly, helping to equalize compression, improve fuel combustion, and reduce friction losses. This reduces fuel consumption by 6–8%.
Reduced vibration and noise – restoring and equalizing compression across the cylinders makes the engine run smoothly. In addition, the dense oil layer cushions piston movement. Together, these effects reduce engine vibration and noise.
Reduced emissions – restoring compression and optimizing clearances in the cylinder-piston assembly ensure efficient fuel combustion, reducing harmful exhaust emissions.
Shelf life - 5 years.

SHAKE all ATOMIUM products before adding them until the sediment has completely dissolved. Add ONLY TO A WARMED-UP engine or unit, after which the vehicle MUST be operated normally for 20 (minimum) to 50 minutes.

ATOMIUM ACTIVE GASOLINE PLUS (90ml.)

Over 50,000 km of mileage

For treating used gasoline and gas-powered car engines with over 50,000 km of mileage.

ATOMIUM ACTIVE GASOLINE PLUS creates conditions in which the surfaces of the engine’s friction components become coated with a specially structured protective metal layer. This layer partially restores the dimensions and geometry of worn parts, optimizes clearances between friction surfaces, and retains more oil on those surfaces.

This provides the following benefits:

Increased power and fuel savings - partial restoration of wear in the cylinder-piston assembly and a dense oil layer seal clearances in the assembly, providing the necessary gas-tight seal. This restores compression and equalizes it across the cylinders, improving fuel combustion. In addition, the dense oil layer shifts friction toward the hydrodynamic regime, reducing friction losses. Together, these effects increase engine power while reducing fuel consumption by 6–8%.
Reduced oil consumption – the protective layer restores the seal between the cylinder liner, piston ring, and piston groove. This improves oil removal from the cylinder walls and reduces oil burning in the combustion chamber, especially at higher engine speeds.
Reduced vibration and noise – restoring and equalizing compression across the cylinders makes the engine run smoothly. In addition, the dense oil layer cushions piston movement. Together, these effects reduce engine vibration and noise.
Reduced emissions and smoke – restoring compression and optimizing clearances in the cylinder-piston assembly improve fuel combustion and reduce oil burning, thereby reducing harmful emissions and engine smoke.
Restored hydraulic lifter performance – the protective layer restores optimal clearances in the hydraulic lifters, normalizing oil pressure and ensuring proper operation. Longer service life - the protective layer significantly reduces wear on the most heavily loaded friction components, which determine the engine’s service life.

Protection under heavy loads – the protective layer is much more effective at preventing wear on friction components under heavy loads thanks to its structural properties (hardness and elasticity) and its ability to retain more oil.

Easier starting and protection during cold starts – treated surfaces can retain an oil layer during extended periods of inactivity. This makes the first engine revolutions easier and prevents increased wear caused by insufficient lubrication during startup, especially at subzero ambient temperatures.
Protection during spirited driving – treated surfaces retain a denser oil layer, reducing wear and compensating for insufficient lubrication when engine speed rises rapidly.
Shelf life - 5 years.

SHAKE all ATOMIUM products before adding them until the sediment has dissolved. Add ONLY TO A WARMED-UP engine or unit, after which the vehicle MUST be operated normally for 20 (minimum) to 50 minutes.

Active Regular (100ml.)

For use at every subsequent oil change. Maintains the effect of the initial treatment. Simply add it to freshly changed oil. SHAKE all ATOMIUM products before adding them until the sediment has completely dissolved. Add ONLY TO A WARMED-UP engine or unit, after which the vehicle MUST be operated normally for 20 (minimum) to 50 minutes.

These products create conditions in which the surfaces of the engine’s friction components become coated with a specially structured protective metal layer capable of retaining more oil. Active Regular maintains this layer and restores it if it wears down. This preserves the engine’s performance at the level achieved through treatment with Atomium tribotechnical compounds.

The following benefits are maintained:

Longer service life - the protective layer significantly reduces wear on the most heavily loaded friction components, which determine the engine’s service life. In addition, treated surfaces retain oil better, protecting the engine when lubrication is insufficient due to overheating, spirited driving, or accidental oil loss.

Easier starting and protection during cold starts – treated surfaces can retain an oil layer while the engine is switched off for an extended period. This makes the first engine revolutions easier and prevents increased wear caused by insufficient lubrication during startup, especially at subzero ambient temperatures.

Rated engine power – a dense oil layer in the clearances of the cylinder-piston assembly provides the necessary gas-tight seal, maintaining compression and efficient fuel combustion. The dense oil layer shifts friction toward the hydrodynamic regime, reducing friction losses. Together, these effects help maintain engine power at its rated level.

Low fuel consumption – conditions that promote efficient fuel combustion and reduce friction losses help save fuel.

Low oil consumption – maintaining optimal clearances between the oil-control ring and the cylinder walls prevents oil from entering the combustion chamber and can reduce or eliminate oil burning.

Reduced vibration and noise – restoring and equalizing compression across the cylinders makes them operate smoothly. In addition, the dense oil layer cushions piston movement. Together, these effects reduce engine vibration and noise.

Low emissions – restoring compression and optimizing clearances in the cylinder-piston assembly ensure efficient fuel combustion, reducing harmful exhaust emissions